Coating failure
White haze, peeling, cloudy patches and uneven sheen show that the existing sealer or its bond needs to be tested.
White haze, peeling sealer, trapped efflorescence and uneven joints need a restoration plan before another coat goes down.
We identify the paver type, age, exposed aggregate, porosity, old coating, joint material and drainage. Then we wet a test area and watch the color change and absorption for several seconds. That surface response tells us whether the coating is still protecting the paver or trapping a problem underneath it.
White haze, peeling, cloudy patches and uneven sheen show that the existing sealer or its bond needs to be tested.
Mineral haze below a failed coating cannot be corrected by adding more product over the top.
High and low joints, mixed sand colors, mortar, silica sand or loose material all change the restoration scope.
Standing water, clogged drains and irrigation overspray can break down a coating and void an otherwise good finish.
White haze, peeling sealer, trapped efflorescence and three colors of joint sand ran across one connected flagstone pool deck and patio. Stripping only the obvious patches would have changed the porosity unevenly, so we restored the entire field.
White haze, peeling sealer, trapped efflorescence, mixed joint sand and several loose or sunken pavers.
Full strip, drain cleanout with a sewer-jet nozzle, paver reset and complete replacement with ASTM C144 joint sand.
Trident Cat 5 at a D1 mix, two flood coats and one top coat for a color-enhanced semi-wet finish and solid joints.
The condition of the coating, joints, drainage and paver itself decides whether we maintain, re-sand or fully restore it.
Water beads, the color is still enhanced and the surface is not being damaged by traffic, weather or drainage.
The joints are stable and the coating is sound, but the color enhancement or sheen is starting to fade.
Newer or consistently maintained pavers may only need cleaning and joint correction before the next protection step.
Peeling sealer, trapped efflorescence, patchy absorption or contaminated joints call for stripping and rebuilding the system.
Stripping is only one stage. The surface, joints, drainage, product and cure window all have to work together.
We identify whether the problem is moisture blush, over-application, incompatible sealer, failed joint sand, staining, or natural stone sealed with the wrong product.
When stripping is needed, we use surface-appropriate stripping agents and controlled pressure to remove failed coating without damaging the pavers.
We clean the surface, treat rust or oil where possible, rinse thoroughly, and give the pavers time to dry before the next phase.
We remove loose or contaminated joint material and install the sand selected for the project, typically ASTM C144 joint sand on standard paver fields.
We reseal only when conditions are right, using the right product for concrete pavers, brick pavers, travertine, or natural stone.
Failed sealer looks different from one community to the next. These are the markets where our crews handle the most stripping and restoration work.
Drag the slider on each photo to see the transformation.
Recent projects from our crews across Tampa Bay.
One team, one insurance policy, one invoice. Residential and commercial exterior cleaning across Tampa Bay.
Clean, re-sand and seal your pavers with a system selected for the surface, drainage, porosity and finish you …
Learn more →
Inspection-led paver cleaning and joint restoration with ASTM C144 sand for standard fields and compatible pol…
Learn more →
Low-pressure soft wash cleaning for vinyl, stucco, Hardie board, brick and stone exteriors, safely removes mo…
Learn more →
Soft-wash roof cleaning for shingle, tile and metal roofs, kills Gloeocapsa magma algae at the root and exten…
Learn more →
Professional pressure washing for driveways, patios, pool decks, sidewalks and concrete surfaces. Restores con…
Learn more →
Hand-cleaned gutters, downspout flush test, and exterior gutter brightening, removes tiger striping and resto…
Learn more →
Deep surface cleaning for concrete and paver driveways, removes oil, rust, mildew and restores original color…
Learn more →
Streak-free window cleaning interior and exterior using pure-water technology, no soap residue, no water spot…
Learn more →
Gentle deck cleaning for wood, composite and PVC decks, removes algae, mildew and gray weathering without dam…
Learn more →440 verified Google reviews · 4.9★ average rating
"Showed up quick and did the job fast and perfect. I am an estimator and did some math. Their prices are great!!"
"Very pleased. They did a great job! The guys were really pleasant to work with...smiling and friendly. I will have them back."
"Great crew. Great job."
"Darrell and Travis were very nice and professional did an outstanding job and would recommend them"
"Our experience with Travis and Darrell was excellent. The job was completed to our satisfaction in such a short amount of time. We are impressed with the quality and professionalism of your company and it's employees. We will definitely recommend you to others and will be calling you for other services in the future."
"Great communication, scheduling and service. Chris and Keaton went over and above, also cleaning both of my outdoor storage sheds, which was not expected. Our expectations were great over met. We will definitely use your services in the future as well as highly recommend you."
Free same-day estimates · No-obligation quotes · 4.9★ from 400+ Google reviews
📞 Call 727-579-7825 Get Online QuoteFill out the form below, we'll text you a quote within a few hours, often same-day.
Same-day quotes for paver sealing, restoration, roof cleaning, house washing, and exterior cleaning.
We will review the request and text or call you back with the next step.
